How To Wear A Tool Belt?

Are you feeling uncomfortable or struggling to make the best use of your tool belt? Do you always feel the necessity of more spaces in your tool belt even though there are ample pockets? If yes, well then, you have landed at the right place.

A perfectly organized tool belt ensures the safety and increases productivity on the job. Moreover, it makes it easier to perform effectively, especially in an emergency. Using and wearing a tool belt properly allows you to keep both your hands-free to work.

You will have easy access to your whole repository of tools, no matter when or where you need those. You can be either on the ladder or on the rooftop; the tool belt is always ready to provide you the tools you require. The best setup of a tool belt varies from person to person as different people have different ways of working.

But professionals follow some basic rules to organize and wear a tool belt to get the best output. So let us dig in to find out the best ways to wear a tool belt properly.

What are the benefits of wearing a tool belt?

Before learning the wearing procedure, we can discuss the benefits of a toolbelt. A toolbelt is an extremely beneficial item for carrying all your necessary tools together. So, wearing the belt saves both your energy and time as you can easily organize your tools in a short time.

The prime benefit of a tool belt is you can arrange lots of tools precisely as per their size in the pouches and pockets. So you always have easy access to the necessary tools. You can consider the tool belt as your working assistant.

You can carry various types and sizes of tools like hammers, nails, chisels, and more in a tool belt. These sharp tools will poke you if you bring those in your shirt or pant pockets, whereas a tool belt can easily store these without causing any harm to you.

When you need to work climbing a ladder at a height, climbing up and down frequently to retrieve various tools will waste the majority of your time. A tool belt is the best solution to this problem.

How to choose a tool belt?

Though we have discussed the factors to be considered while buying a tool belt in detail, it is vital to go through this matter here again.

It is essential to have enough space in the tool belt to fit all of your tools there. It is a crucial requirement of using a tool belt. So make sure to buy a tool belt with enough storage; otherwise, it will be of no use.

Let’s find out the reasons why owners of tool belts cannot use them properly. The first reason is that they are new to the usage of tool belts; the second is their tool belts don’t fit them well. An unfit tool belt is either too high or too low from your waist; both cause discomfort while working. Besides, the belt can be too tight or too loose. So before purchasing, you should double-check the size of the tool belt.

After checking the space and fitting of the tool belt, you have to check the durability. The pockets and pouches should be durable enough to hold all of your tools for a long time. You can choose a leather tool belt to ensure durability as they are the best tool belt for the money and last longer through wear and tear.

But you know leather products are expensive, so if you are not a professional and want to buy the belt for your DIY project, you can go for a nylon tool belt. There are some tool belts with a blend of leather and nylon at a comparatively lower price; you can purchase those also.

Other checkpoints are comfort, provision of suspenders, carrying handles, accessibility, and more.

How to organize a tool belt?

Organizing a tool belt efficiently is the primary condition of wearing a tool belt properly. The priority list of managing a tool belt varies from profession to profession, person to person. But there are rules that most professionals follow to enhance performance; you can follow these rules too. If you don’t get your desired result, you can organize it at your convenience. The steps involved in organizing a tool belt are as follows.

1. Buy a belt with multiple pockets and pouches:

It is important to distinguish between pouch and pocket. A tool belt pouch is a full container hanging off of the tool belt. An ideal tool belt features two pouches on two sides, each with a different number of pockets. Which tools to be stored where depends on the size and shape of the pockets. Some tiny pockets have some form of closure so that small objects like nails do no spill out.

You have to hang off the pouches in a way so that you can use these conveniently and bring out any tools while working without keeping your eyes on the tools in the pouches.

If you want to keep many tools of various sizes and shapes, you have to buy a tool belt with lots of pockets. The hammer sphere should be on your right-hand side. Besides, you need to make sure that you have numerous pockets on your dominant hand side to ensure effortless reach to your tools. Don’t forget to buy the right or left-hand belt according to your need.

2. Check the tool belt before every use:

You need to check the tool belt before each use as they become dirty after a few usages. You have to clean the tool belt before wearing it as you will not feel comfortable wearing a dirty belt. In addition, you need to repair the belt if it gets damaged. For safety purposes, you have to check the buckles. Pouches should also be checked, and holes need to be repaired if there are any.

3. Organize the tool belt:

Buy a tool belt that best suits you. Your belt should work as per your style, whether you are a left or right-handed person. For example, the main pouch should be on the right side and the buckle on the left side for a right-handed person. For a left-handed person, it is vice-versa.

If your tool belt features adjustable pouches, you can reposition these at your convenience. However, for belts with three pouches, it is advisable to manage the middle bag properly so that it cannot create any disturbance.

4. Keep the main tools for the dominant hand:

All tools are not important equally for people of all professions. Therefore, you need to prioritize and organize the tools as per your necessity. The primary tools or frequently required tools should be kept at the dominant side to ensure easy access at any time. Another reason is that the dominant hand can work more and faster than the opposite hand.

The primary and secondary tools list varies for the variation in work. For example, for the electrician’s tool belt, the voltage tester, pliers, screwdrivers will be considered primary tools. On the other hand, a hammer, pencils, saws, nails are few essential tools for carpenters.

5. Keep the auxiliary tools for the assistant hand:

The less frequently used tools are considered auxiliary tools and should be placed on the assistant hand side. On this side, you can keep accessories and small items for sudden need. Sometimes, auxiliary tools are used combinedly with main tools, such as holding the nail with the assistant hand while hammering with the dominant hand.

So if you want the full flow of work, you have to remember the exact places of all tools. Like main tools, auxiliary tools list also varies from trait to trait, such as for electrician’s auxiliary tools are scissors, power drill, knock out sets. On the other hand, levels, sliding bevels are considered the auxiliary tools for carpenters.

How to wear a tool belt?

Many of you might find it silly initially, but there are many instructions to follow about wearing a tool belt properly. Apparently, it seems a simple issue, but you may end up with poor performance wasting your valuable time and energy if you cannot wear it properly. The steps involved in efficiently wearing a tool belt are as follows.

1. Fit the belt properly:

Now your tool belt is ready to wear. Wear it with the loops of your trouser like your regular belt around your waist. Close the buckle as per your convenient tightness. The fitting of the tool belt should neither be tighter nor looser. Otherwise, it will cause discomfort while working, and your job performance will be affected poorly, no matter if you are an electrician or a carpenter.

So, it is done. Your belt is around your waist. You may need suspenders if you feel heavy.

2. Pouches and pockets to be rear for control and speed:

If you switch the pouches to the backside of your body, you will be able to bend over easily for specific tasks. However, for some works, you may need to bend over for a long time. So, you should be able to rearrange the belt and place the pouches and pockets to the backside whenever you feel it necessary. It will enhance your comfort and efficiency.

In fact, working with a tool belt keeping the pockets on the front side of your body is really irritating for anyone, especially for those who need to bend over frequently for the sake of performing their task comfortably. For example, carpenters need to wear their tool belts in this way to protect them from back pain.

3. Keep your hands free:

When you climb a ladder to work at a height, carry the tools in the tool belt to keep your both hands free to hold the ladder or other solid support. It is essential to follow this rule to save both yourself and the tools you are carrying. Otherwise, you cannot hold the ladder properly and may fall that may cause severe injury. You may also cause trouble to others by dropping tools on them.

It is safe not to carry tools at hand while climbing. In this situation, a waistband can be a wise solution to bring some small tools with you. So you will be able to use these tools when you need them. Besides, carry the essential tools only while climbing a ladder as too much weight can harm your shoulder. Keep the secondary tools separated for further use.

Besides, don’t carry many tools when you are climbing a ladder. Too much weight will be a problem for you, and that may be difficult for your shoulder. Pick the tools that you need and keep the rest of the items separated for other use.

4. Avoid carrying any extra tools:

It is recommended not to bear many tools that increase weight and may cause back pain. It will also create a negative impact on your job performance. So, be choosy to select tools for specific jobs and do not carry the weight that the tool belt cannot withstand.

5. A particular place for every tool:

Keeping maximum tools in only one pouch is not a good idea as while walking wearing the tool belt, the instruments may get mixed. So, make sure that each tool is at a particular place. It will be very challenging for you to find the right tool at the right time if you keep one device at one pocket today and at another place tomorrow.

It is really annoying not to get the tools at the exact location where they used to be. If you fix a particular place for every tool and maintain it properly, you will be habituated with it gradually, and your precious time will be saved during work.

6. Maintain a hierarchy of tools while wearing a tool belt:

Generally, all the important jobs are done by the main tools pulled out by the dominant hand. Therefore, if you arrange the tools in a hierarchy, you can obtain the highest benefit of purchasing a tool belt. So, either you are left-handed or right-handed, the essential tools that are mostly used must be arranged on your dominant hand side.

On the other hand, you should keep the auxiliary tools on the other side to ensure smooth working.

7. Constantly changing the mass center:

Moving the mass center is very important to evenly distribute the weights and keep you away from back pain. So you have to set up the pouches, pockets, and tool holders in a manner that lets you swap the tools easily to balance the mass center.

When you bend over for any task or climb a ladder, the mass center of the tool belt changes. So, you need to do the setup of your tool belt to maintain the mass center in a way that provides you maximum comfort.

8. Good tune:

After you wear the tool belt, check that the pouches, suspender rings, and carry handles are outside the belt. You will feel uncomfortable if they lie under your tool belt. So, take those out to start working comfortably.
Congratulations on wearing your tool belt successfully.

When do you need to use a tool belt with suspenders?

Whether you are a professional carpenter or an electrician, your work demands many tools to be carried in your tool belt. So, it becomes heavy naturally. As a result, after wearing it for a long time, you can have muscle stress or back pain.

If you continue to do this, it will cause significant damage to your body. Some tool belts try to mitigate it by adding padding into the belt, which can cause little comfort but cannot take away the weight from your body.

Okay, do not worry. There are some solutions to this problem; among these, the best is installing suspenders with the toolbelt. The suspenders distribute the total weight throughout the body and can relieve you from stress and back pain.

In a word, it can be said that the tool belt with suspenders should be used when your hands are occupied and your body is in an uncomfortable position. But the suspenders can be the reason for discomfort if you cannot install them correctly.

How do you use a tool belt with suspenders?

Wearing tool belt with suspenders

Let us learn how to wear a tool belt with suspenders, though it is not a challenging job. The steps are as follows.

Step 1: First, wear the tool belt and lock the buckle as per your convenient fitting. If the belt fitting is not okay, you may feel uncomfortable even with the suspenders.

Step 2: This step involves attaching the suspenders with the suspender back hook of the tool belt.

Step 3: Now carry the suspenders through the back and chest, and fasten them with front hooks. Then you need to tighten the chest line. Finally, the chest strap should be leveled. If your fingers can reach the end of the pouches, you can assume that the tool belt and the suspenders are in the correct position.

Step 4: After installing the suspenders properly, you can load the pockets with tools.

Essential considerations while wearing tool belts:

  • Fit the belt securely with the buckle.
  • Do not fit the tool belt too tight or too loose.
  • Organize the tools as per your job.
  • You can use suspenders only for carrying heavy loads.
  • Do not overload the tool belt.
  • Maintain and clean the tool belt regularly for the highest performance.

Cleaning and maintaining the tool belt:

If you own a tool belt, you should know that it requires regular maintenance and cleaning. You might think that maintenance of a tool belt is not mandatory at all, but it will enhance the longevity of your tool belt if you take proper care of it. To maintain your leather tool belt, you need to use a leather protector or leather conditioner.

Otherwise, this expensive item will get a cracking surface which is not expected at all. Without leather tool belts, others require no protector or conditioner. They can be washed with regular clothes in washing machines. But we recommend following the instructions provided by the manufacturers to ensure an extended lifespan.

Some cleaning and maintenance tips are as follows:

  • Wipe away the dust and stains as soon s possible.
  • Use a soft-bristled brush to clean belt pockets and pouches.
  • Need extra care for leather tool belts. Use leather conditioners to look them as good as new.
  • Avoid excess heat or direct sunlight exposure.
  • Inspect your belt regularly and repair it as soon as you find any damage.

Wearing a tool belt is not a task that you should neglect. It has a tremendous impact on your shoulder and waist. It can influence your work performance greatly. So, try to learn and follow the techniques of how to wear a tool belt properly. Then you will always have a great time working with the tool belt. And to avoid back pain and exhaustion, do not forget to use suspenders, in the right way, of course.

The below video is for you to get more ideas about wearing a tool belt.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *